혼합신호 오실로스코프 (MDO-2000E)

계측기기 제품
PRODUCT ITEMS

▼ 주요 브랜드 바로가기

Tel : 문/의/전/화
070-4333-8982

Fax :
070-7966-8928

평일 09:00 ~ 19:00
일요일, 공휴일 휴무

입금계좌: 기업은행
323-109439-01-017

예금주 : (주)파워티엠

| 혼합신호 오실로스코프 (MDO-2000E)

> 제품소개 > 오실로스코프 혼합신호 오실로스코프 GWINSTEK

제품명	혼합신호 오실로스코프
모델명	MDO-2000E
특 징	•대역폭: 200MHz/ 100MHz/ 70MHz
상세사양	•혼합신호 오실로스코프, MDO-2000E •대역폭 : 200MHz/100MHz/70MHz •채널 : 2CH/4CH •샘플링 속도 : 최대 1GSa/s •레코드 길이 : 최대 10Mpts •디스플레이 : 8인치 TFT LCD (WVGA 800 x 480)
인터페이스	•USB/LAN
브랜드	GWINSTEK / Taiwan
판매가격	전화문의 : ☎070-4333-8982
배송비	무료배송

견적문의 위시리스트

카타로그 메뉴얼

전체목록 ◀◀ 뒤로가기

상품 기본설명

혼합신호 오실로스코프 (MDO-2000E)

제품사양

주요 특징

• 200/100/70MHz bandwidth selections ; 2 or 4 channels

• Real time sample rate for each channel is 1GSa/s (2 channel models)

• Maximum real time sample rate is 1GSa/s (4 channel models)

• Per Channel 10M memory depth and VPO waveform display technology

• Waveform update rate up to 120,000 wfms/s

• 8 “ WVGA TFT LCD display

• Maximum 1M FFT provides higher frequency domain resolution measurements

• High ,low and band pass filter functions

• 29,000 segmented memories and waveform search functions

• I2C/SPI/UART/CAN/LIN serial bus trigger and decoding function

• Data log function is able to track signal changes up to 1000 hours

• Network storage function

• Mask test function

• MDO-2000EG equips with a spectrum analyzer and a dual channel 25MHz AWG MDO-2000EX equips with a spectrum analyzer ; a dual channel 25MHz AWG; DMM and power supply

One Oscilloscope ,Two Domains

MDO-2000E series is multi-functional mixed domain oscilloscope. The series includes two feature combinations : MDO-2000EG and MDO-2000EX. MDO-2000EG models have a built-in spectrum analyzer and a dual channel 25MHz arbitrary waveform generator and MDO-2000EX models feature a built-in a spectrum analyzer, arbitrary waveform generator, a 5,000 count DMM, and a 5V/1A power supply. The first of its kind, MDO-2000EX is the only oscilloscope to equip with aDMM and a power supply in the T&M industry.

While entering the spectrum mode, MDO-2000E series will display a full screen of frequency domain. Users can input Center frequency, Span, Start frequency, and Stop frequency based upon test requirements so as to rapidly and intuitively observe required frequency range that allows users to experience the user interface of a real spectrum analyzer. While observing frequency domain display, engineers can observe waveform characteristics, which are not easilyto be seen from time domain waveforms, for instance, the harmonic composition of a waveform and the frequency characteristics of a modulation signal. Compared with oscilloscope' FFT, MDO-2000E series allows engineers to effectively conduct signal measurements on frequency domain.

Conventional DSO's FFT always calculates the entire signal bandwidth up to half the sampling rate (Fs). However, the insufficient calculation capability can't conduct FFT calculation with more points. Users can't have the signal's detailed frequency information due to the insufficient frequency resolution from the calculation result. Whereas MDO-2000E series analyzes signal spectrum of interest. Compared with oscilloscope' FFT, MDO-2000E series allowsengineers to effectively conduct signal measurements on frequency domain. Right illustration shown the conventional DSO's FFT (above figure) VS. MDO-2000E's Spectrum analyzer (below figure).

MDO-2000E series frequency domain also includes Spectrum Trace Type settings (Normal, Max-hold, Min-hold, and Average)(Figure 1). Users can freely select various Spectrum Traces for simultaneous display. Detection method (Sample, +Peak, -Peak, and Average)(Figure 2) can be individually set for each Trace. Additionally, users, via Cursor, can manually mark the corresponding positions to reflect Frequency and Amplitude. The Search function can also be appliedto log spectrum's Peak Table. Amplitude is displayed with dB and Marker can obtain measurement data. Users can use the Search function to search and mark the amplitude and frequency of spectrum signal. Search methods include Max. peak and threshold. Measurement results can be displayed and saved.(Figure 3)

456d2d849d5fd47e8a3d0165f0bbbe06_1512565049_0043_1557283655_1576113543.jpg

Compared with the general spectrum analyzer, the spectrum function of MDO-2000E series can test below~9kHz signals, which is applicable to the frequency domain analysis of audio frequency and vibration. MDO-2000E series can also test the frequency domain signal with DC component without damaging the instrument. With respect to frequency domain waveform display, MDO-2000E series, featuring the same capability of a real-time spectrum analyzer, is fasterthan the general spectrum analyzer. Why? It is because MDO-2000E series utilizes digital circuit and software to calculate FFT. The general spectrum analyzer can only process the signal of a narrow frequency bandwidth at a time by frequency sweeping. Each sweeping will take several ms to dozens of ms. Hundreds and thousands of frequency sweepings are gathered to form a spectrum. Therefore, the displayed spectrum is not obtained at the same time. MDO-2000E series obtains spectrum display at the same time by utilizingdigital circuit and software to calculate FFT that is faster than the frequency sweeping method. The FFT settings of oscilloscopes are based upon horizontal scale (sample rate) setting, which is totally different from the frequency range setting of MDO-2000E series. Most instruments will have insufficient frequency resolution due to insufficient FFT points while conducting spectrum measurement by FFT. Compared with the FFT of oscilloscopes, MDO-2000E series satisfies users with signal measurement requirementsunder 9kHz; a better setting interface, measurement resolution and measurements speed.

Specifications
	MDO-2072EG(X)	MDO-2074EG(X)	MDO-2102EG(X)	MDO-2104EG(X)	MDO-2202EG(X)	MDO-2204EG(X)
Channels	2ch+Ext	4ch	2ch+Ext	4ch	2ch+Ext	4ch
Bandwidth	DC~70MHz	DC~70MHz	DC~100MHz	DC~100MHz	DC~200MHz	DC~200MHz
	(-3dB)	(-3dB)	(-3dB)	(-3dB)	(-3dB)	(-3dB)
Rise time	5ns	5ns	3.5ns	3.5ns	1.75ns	1.75ns
BandwidthLimit	20MHz	20MHz	20MHz	20MHz	20M/100MHz	20M/100MHz
Vertical Sensitivity
Resolution	8 bit
	1mV~10V/div
Input Coupling	AC, DC, GND
Input Impedance	1MΩ// 16pF approx.
DC Gain Accuracy	±(3%)when 2mV/div or greater is selected
	±(5%)when 1mV/div is selected;
Polarity	Normal & Invert
Maximum Input Voltage	300Vrms, CAT I
Offset Position Range	1mV/div ~ 20mV/div : ±0.5V
	50mV/div ~ 200mV/div : ±5V
	500mV/div ~ 2V/div : ±25V
	5V~10V/div : ±250V
Waveform Signal Process	+, -, ×, ÷, FFT, User Defined Expression.
	FFT:1Mpts
	FFT:Spectral magnitude. Set FFTVertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular,Hamming, Hanning, or Blackman.
Trigger
Source	CH1 ,CH2, CH3, CH4, Line, EXT*
	*dual channel models only
Trigger Mode	Auto (supports Roll Mode for 100 ms/div andslower), Normal, Single Sequence
Trigger Type	Edge, Pulse Width(Glitch), Video, Pulse Runt,Rise & Fall(Slope), Alternate,tme out, Event-Delay(1~65535 events),Time-Delay(Duration,4nS~10S), Bus
Holdoff range	4ns~10s
Coupling	AC,DC,LF rej. ,HF rej. ,Noise rej.
Sensitivity	1div
External Trigger
Range	±15V
Sensitivity	DC ~ 100MHz Approx. 100mV
	100MHz ~ 200MHz Approx. 150mV
Input Impedance	1MΩ±3%~16pF
Horizontal
Time base Range	1ns/div ~ 100s/div (1-2-5 increments)
	ROLL: 100ms/div ~ 100s/div
Pre-trigger	10 div maximum
Post-trigger	2,000,000 div maximum.
Time base Accuracy	±50 ppm over any ≥ 1 ms time interval
Real Time Sample Rate	Max.:1GSa/s (4chmodel)
	Per channel 1GSa/s (2chmodel)
Record Length	Per Channel 10M pts
Acquisition Mode	Normal, Average, Peak Detect, Single
Peak Detection	2ns (typical)
Average	selectable from 2 to 256
X-Y Mode
X-Axis Input	Channel 1; Channel 3*
	*four channel models only
Y-Axis Input	Channel 2; Channel 4*
	*four channel models only
Phase Shift	±3° at 100kHz
Cursors and Measurement
Cursors	Amplitude, Time, Gatingavailable;Unit:Seconds(s),Hz(1/s) ,Phase(degree) ,Ration(%)
Automatic Measurement	38 sets: Pk-Pk, Max, Min, Amplitude, High, Low,Mean, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, ROVShoot, FOVShoot,RPREShoot, FPREShoot, Frequency, Period, RiseTime, FallTime, +Width, -Width,Duty Cycle, +Pulses, -Pulses, +Edges, -Edges, %Flicker ,Flicker Idx,FRR, FRF,FFR, FFF, LRR, LRF, LFR, LFF, Phase
Control Panel Function
Auto counter	6 digits, range from 2Hz minimum to the ratedbandwidth
Autoset	Single-button, automatic setup of all channelsfor vertical, horizontal and trigger systems, with undo Autoset
Save Setup	20 sets
Save Waveform	24 sets
Display
TFT LCD Type	8" TFT LCD WVGA color display
Display Resolution	800 horizontal × 480 vertical pixels (WVGA)
Interpolation	Sin(x)/x
Waveform Display	Dots, vectors, variable persistence (16ms~4s),infinite persistence
Waveform Update Rate	120,000 waveforms per second, maximum
Display Graticule	8 x 10 divisions
Display mode	YT ;XY
Interface
USB Port	USB 2.0 High-speed host port X1, USB 2.0High-speed device port X1
Ethernet(LAN) Port	RJ-45 connector, 10/100Mbps with HP Auto-MDIX
Go-NoGo BNC	5V Max/10mA TTL open collector output
Kensington Style Lock	Rear-panel security slot connects to standardKensington-style lock.
Spectrum Analyzer Specifications
Frequency range	DC~500MHz (Max. ,Max.bandwidth~500MHzuncalibrated)
Span	1kHz~500MHz(Max.)
Resolution bandwidth	1Hz ~ 500kHz(Max.)
Reference level	-50 dBm to +40dBm in steps of 5dBm
Vertical units	dBV RMS; Linear RMS; dBm
Vertical position	-12divs to +12divs
Vertical scale	1dB/div to 20dB/div in a 1-2-5 Sequence
Display average noise level	1V/div < -50dBm, Avg : 16
	100mV/div < -70dBm, Avg: 16
	10mV/div < -90dBm, Avg :16
Spurious response	2nd harmonic distortion< 40dBc
	3rd harmonic distortion< 45dBc
Frequency domain trace types	Normal ; Max Hold ; Min Hold ; Average (2 ~256)
Detection methods	Sample ; +Peak ; -Peak ; Average
FFT Windows	FFT Factor :
	Hanning 1.44
	Rectangular 0.89
	Hamming 1.30
	Blackman 1.68
AWG Specifications
Channels	2
Sample Rate	200 Msa/s
Vertical Resolution	14 bits
Max. Frequency	25 MHz
Waveforms	Sine, Square, Pulse, Ramp, DC, Noise, Sinc, Gaussian, Lorentz, Exponential Rise, Exponential Fall, Haversine,Cardiac
Output Range	20 mVpp to 5 Vpp, HighZ;10 mVpp to 2.5 Vpp, 50Ω
Output Resolution	1mV
Output Accuracy	2% (1 kHz)
Offset Range	±2.5 V, HighZ;±1.25 V, 50 Ω
Offset Resolution	1mV
Sine
Frequency Range	100mHz to 25MHz
Flatness	±0.5 dB( relative to 1kHz)
Harmonic Distortion	-40 dBc
Stray (Non-harmonic)	-40 dBc
Total Harmonic Distortion	1%
S/N Ratio	40 dB
Square/Pulse
Frequency Range	100 mHz to 15MHz
Rise/Fall time	<15ns
Overshoot	<3%
Duty cycle	Square:50%;Pulse:0.4%~99.6%
Min. Pulse Width	30 ns
Jitter	500 ps
Ramp
Frequency Range	100mHz~1MHz
Linearity	1%
Symmetry	0 to 100%
DMM Specifications (MDO-2000EX only)
	5,000 counts
DIGITLEVEL	CAT II 600Vrms, CAT III 300Vrms
DC VOLTAGE	50mV, 500mV, 5V, 50V, 500V, 1000V 6ranges
Accuracy	50mV, 500mV, 5V, 50V, 500V, 1000V ±(0.1%reading + 5 digits)
Input Impedance	10MΩ
DC CURRENT	50mA, 500mA, 10A 3ranges
Accuracy	50mA - 500mA ±(0.5% reading + 0.05mA)
	10A ±(0.5% reading + 50mA)
AC VOLTAGE	50mV, 500mV, 5V, 50V, 700V 5ranges
Accuracy	50mV, 500mV, 5V, 50V, 700V ±(1.5% reading+ 15 digits) at 50Hz-1kHz
	* Amplitude greater than 0.2% ofthe full scale reading.
AC CURRENT	50mA, 500mA, 10A 3ranges
Accuracy	50mA, 500mA, ±(1.5% reading + 0.05mA) at50Hz-1kHz
	10A ±(3% reading + 50mA) at50Hz-1kHz
	* Measure range: >10mA
RESISTANCE	500Ω, 5kΩ, 50kΩ, 500kΩ, 5MΩ, 5ranges
Accuracy	500Ω, 5kΩ, 50kΩ, 500kΩ ±(0.3% reading + 3digits)
	5MΩ ±(0.5% reading + 5digits)
Power supply Specifications (MDO-2000EX only)
Output Channel	CH1 & CH2
Output voltage range	1.0V~5.0V
Output Current (Max.)	1A
Voltage Step	0.1V Continuously Adjustable
output Voltage Accuracy	±3%
Ripple and Noise	50mVrms
Miscellaneous
Multi-language menu	Available
operation environment	Temperature: 0°C to 50°C. Relative Humidity ≤80% at 40°C or below; ≤ 45% at 41°C ~ 50°C.
On-line help	Available
Time clock	Time and Date ,Provide the Date/Time for saveddata
Dimensions	384mmX208mmX127.3mm
Weight	3kg
Pleasedo not hesitate to contact us if you have any queries on the MDO-2000E seriesannouncement.

라인업

기본 액세서리
Power Cord, Certificate of Calibration, CD-ROM (with Quick Start Guide, User Manual, Programming Manual), Passive probe (one probe per channel)
GTL-110	BNC-BNC cable*2
GTL-105A	Alligator Clip test lead (only on MDO-2000EX)
GTL-207	Banana plug test lead (only on MDO-2000EX)

다운로드

주문 정보
MDO-2204EG	200MHz,4-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG	견적요청
MDO-2104EG	100MHz, 4-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG	견적요청
MDO-2074EG	70MHz, 4-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG	견적요청
MDO-2204EX	200MHz, 4-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG ,5,000 counts DMM and power supply	견적요청
MDO-2104EX	100MHz, 4-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG ,5,000 counts DMM and power supply	견적요청
MDO-2074EX	70MHz, 4-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG ,5,000 counts DMM and power supply	견적요청
MDO-2202EG	200MHz,2-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG	견적요청
MDO-2102EG	100MHz, 2-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG	견적요청
MDO-2072EG	70MHz, 2-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG	견적요청
MDO-2202EX	200MHz,2-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG ,5,000counts DMM and power supply	견적요청
MDO-2102EX	100MHz, 2-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG ,5,000 counts DMM and power supply	견적요청
MDO-2072EX	70MHz, 2-channel, Digital Storage Oscilloscope， Spectrum analyzer ,dual channel25MHz AWG ,5,000 counts DMM and power supply

*** 본 (주)파워티엠 홈페이지의 게시물 및 제품 자료를 사전 동의없이 무단으로 복사 및 배포를 금지합니다. ***

이 분류에 등록된 다른 상품이 없습니다.

전체목록 ▲ 맨위로 ◀◀ 뒤로가기

상품문의

상품정보
상품문의 0
배송정보
관련상품 0

등록된 상품문의

상품문의가 없습니다.

상품문의 쓰기 새 창 더보기

배송정보

상품정보
상품문의 0
배송정보
관련상품 0

★ 배송정보 ★

1. 재고 보유상품의 경우 입금확인 후 1~3일 정도 상품 준비기간이 소요되며, 주문량이 많을 경우

준비기간이 조금 더 소요될 수 있습니다.

(단, 재고 소진 상품의 경우 배송기간이 3주~4주 소요될수 있사오니 참고바랍니다.)

2. 주문하신 상품은 배송완료 문자를 받아보신 후 1~2일 이내에 수령하실 수 있습니다.

3. 10만원 이상 구매시 배송료는 무료입니다.

※ 해외배송은 무료배송이벤트에서 제외됩니다.해외배송 상품무게는 별도 측정 후

주문상품 구매액 + 운임료와 함께 결제해주셔야 합니다.

혼합신호 오실로스코프 (MDO-2000E)

쇼핑몰 검색

계측기기 제품 PRODUCT ITEMS

| 혼합신호 오실로스코프 (MDO-2000E)

상품 기본설명

제품사양

라인업

다운로드

상품 정보

상품문의

등록된 상품문의

배송정보

관련상품

계측기기 제품
PRODUCT ITEMS