1/2 Rack Programmable DC Power Supplies / DLM600 series
전력전자 제품
PRODUCT ITEMS▼ 주요 브랜드 바로가기
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Tel : 문/의/전/화
070-4333-8982
Fax :
070-7966-8928
평일 09:00 ~ 19:00
일요일, 공휴일 휴무
입금계좌: 기업은행
323-109439-01-017
예금주 : (주)파워티엠
1/2 Rack Programmable DC Power Supplies / DLM600 series
Product Overview
The Sorensen DLM 600 series of programmable power supplies is designed to provide continuously variable output voltage and current for a broad range of applications in a compact 1U (1.75 inches) high, half-rack (8.5 inch) wide chassis.
With the use of Zero Voltage Switching (ZVS) technology, these supplies are able to achieve exceptionally low ripple and noise rivaling larger and more expensive linear power supplies. In addition, the high efficiency and fast load transient response assure that the DLM 600 is ideal for even the most demanding applications.
The DLM 600 power supply series is ideal for high density multiple output rackmount requirements or low profile benchtop applications. Output voltages from 0-5VDC to 0-300VDC and currents from 0-2A to 0-75A are available.
The cooling air intake is at the front and sides with exhaust at the rear and sides. Variable speed fans are controlled as a function of ambient air temperature and load, thus reducing acoustic noise and increasing fan life. This allows supplies to be stacked one directly on top of another without space in between, yielding maximum rackmount packing density and a wide operating temperature of 0-50° C. An optional rackmount kit is available to easily mount one or two units side-by-side.
The front panel layout makes the DLM 600 power supply series easy to use. Voltage and current can be set from individual 10-turn potentiometer knobs. Control push buttons include power on, output on, local/remote, voltage/current preview and overvoltage protection preview. Set-point or actual voltage/ current values can be viewed on two 3-1/2 digit LED displays.
DLM 600 near-linear DC power supplies can be connected in series or parallel. All models automatically accept any standard single phase input without manual set up.
Features And Benefits
- High Power Density
600 watts in 1U (1.75 inches) high, half rack (8.5 inches) wide; no top or bottom clearance spacing required.
- Near Linear Ripple & Noise
Ripple as low as 2.5mV rms, noise as low as 15mV p-p.
- Remote Control
- 16 bit programming through LXI -compliant Ethernet LAN / RS-232C (Option M130)
- 12-bit programming through IEEE-488.2 / RS-232C (Option M9G)
- Standard analog programming 0-5V, 0-10V, or 0-5kΩ.
- isolated analog programming (option)
- Pushbutton Preview
Overvoltage protection, voltage and current preview buttons allow viewing these set points at any time with or without the output enabled
- Active Down Programming
Standard internal circuitry to speed up response time to down programming changes
- Universal AC input
- Easy master/slave paralleling with active current sharing
- Software
- IVI-com driver for M130 option
- Labwindows CVI driver for M9G option
- Labview driver for M9G option
- 5 Year Warranty
Specifications
*** 본 (주)파워티엠 홈페이지의 게시물 및 제품 자료를 사전 동의없이 무단으로 복사 및 배포를 금지합니다. ***
|
||||||||||||||||||||||||||||||
전체목록