프로그래머블 리니어 DC 전원공급기 PPH-1503D/1506D/1510D
전력전자 제품
PRODUCT ITEMS▼ 주요 브랜드 바로가기
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Tel : 문/의/전/화
070-4333-8982
Fax :
070-7966-8928
평일 09:00 ~ 19:00
일요일, 공휴일 휴무
입금계좌: 기업은행
323-109439-01-017
예금주 : (주)파워티엠
프로그래머블 리니어 DC 전원공급기 PPH-1503D/1506D/1510D
주요 특징 Dual Channel DC Power Output PPH-1503D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~1.5A) PPH-1506D (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~3A) PPH-1510D (CH1: 0~15V/0~3A or 0~9V/0~5A, 0~4.5V/0~10A(Rear terminal); CH2: 0~12V/0~3A) 3.5 inch TFT LCD Display Built-in DVM Measurement Function High Measurement Resolution (1mV/0.1μA for 5mA Range) Current Sink Function (Maximum : 3.5A) Pulse Current Measurement Long Integration Current Measurement Sequence Function (Sequential power output) Built-in Battery Simulation Function OVP, OCP, OTP & Temperature Display for Heat Sink Support USB (Device& Host)/GPIB/LAN 5 Groups of Save/Recall Setting External RELAY Control |
PPH-15xxD high precision measurement capability achieves the maximum resolution of 1mV/0.1uA and the smallest pulse current width of 33us that satisfy customers’ measurement application requirements of high resolution and pulse current. Fast load current variation will result in voltage sag for general power supplies that will have an impact on DUT’s internal circuit operation. PPH-15xxD is equipped with the excellent transient recovery time, which can, in less than 40us, recover the output voltage to within 100mV of the previous voltage output when the current level changes from 10% to 100% of the full scale. Furthermore, conventional power supplies do not have sufficient response speed to promptly respond to set voltage value once the set voltage is changed. PPH-15xxD has a rise time of 0.2ms and a fall time of 0.3ms, which are 100 times faster than that of conventional power supplies. Therefore, PPH-15xxD can provide DUT with a stable output voltage even when DUT is operating under large transient current output. The internal high-speed sampling circuit design of PPH-15xxD, with the sample rate of 64K, can conduct pulse current measurement without using a current probe and oscilloscope. The current read back accuracy is 0.2%+1uA (equals to 11uA) at 5mA range, and the read back resolution is 0.1uA that allow DUT to be measured with a high accuracy level. Unlike battery, general power supplies, which do not have the characteristics of fast transient recovery time, can not maintain a stable power supply for cellular phone, wireless device, and wearable device which produce large transient pulse current load for hundreds of μs to dozens of ms when in use. PPH-15xxD, different from general power supplies, has the characteristics of fast transient recovery time. While simulating battery to output pulse current, PPH-15xxD can quickly compensate the voltage drop caused by pulse current. PPH-15xxD’s CH1 has the built-in battery simulation function, which can define output impedance settings so as to accurately simulate battery’s impedance characteristics during battery discharge. Fast transient recovery time and built-in battery simulation function together facilitate PPH-15xxD to accurately simulate battery’s real behavior pattern so as to conduct product tests.
PPH-Series Specifications https://www.gwinstek.com/en-global/products/downloadSeriesSpec/1332 |
기본 액세서리 | |
사용 설명서 CD x 1, 퀵 스타트 가이드x 1, 전원 코드 x 1, 테스트리드 GTL-117(최대 10A) x 1, 테스트 리드 GTL-203A(최대 3A) x 1, 테스트 리드 GTL-204A(최대 10A) x 1 | |
옵션 액세서리 | |
GTL-246 | USB 케이블, USB 2.0, A-B 타입,4P |
주문 정보 | ||
PPH-1503D PPH-1506D PPH-1510D | (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~1.5A) (CH1: 0~15V/0~3A or 0~9V/0~5A; CH2: 0~12V/0~3A) (CH1: 0~15V/0~3A or 0~9V/0~5A, 0~4.5V/0~10A(Rear terminal); CH2: 0~12V/0~3A) | 견적요청 |
옵션 액세서리 | ||
GTL-246 | USB 케이블, USB 2.0, A-B 타입,4P | 14,000원 |
상기 가격은 부가세 별도 가격입니다. | ||
*** 본 (주)파워티엠 홈페이지의 게시물 및 제품 자료를 사전 동의없이 무단으로 복사 및 배포를 금지합니다. ***
|
||||||||||||||||||||||||||||||
전체목록